Sunday, November 29, 2009

Winter List

Here is the work list for 2009-2010, minor items omitted.

Remove bow and stern lights. Journeyman has masthead running lights and there just is no sufficient reason to duplicate these by retaining the original lights at the pulpit and stern pulpit.

Fix steaming light. There is a "steaming light" mounted on the mast about ten feet off the deck, used when motoring and also useful at lighting the foredeck when changing sails. It has not worked for several years, despite several efforts at repair. I will probably replace the light itself and the circuit.

Attend to propeller shaft packing. The shaft packing hasn't been changed out in a long time and I ought to do this if only to force myself to really inspect the fitting. I may try some of the newer teflon-goretex packing. It is claimed that the material is so self-lubricating that there is no need to allow the packing gland to drip occasionally.

Reframe forward windows. I reframed the main cabin windows last spring, because they had started leaking. The forward windows (two, very small) present the same problem.

Cole stove shielding. We overnight more and more each fall, and when the stove is hot I worry a bit about the deckhead ("ceiling") and the adjacent bulkhead. I want to put in some attractive shielding, which may be a challenge.

Cole stove deck leak. There is a leak around the smokehead (stovepipe), lets in some rain.

Redbed cleats, winches etc. Last spring I rebedded all the stanchions, pulpits, chainplates and cabintop rails, a major job. I need to finish up that job by rebedding the hardware I didn't get to.

Better reading lights in salon. The reading lights are attractive and original, but not really good for reading.

Replace dodger. With new hardware and a top-notch job, this could cost $1500 or more, which I can't easily afford. I asked Seabags, a Portland maker of handbags which also does some sail repair and similar work, to quote me a price for replicating the original dodger, reusing the existing hardware. I'm hoping it will cost $300 or so - we'll see.

The rest is odds and ends, some quite important but not major in terms of time or expense.

2 comments:

Note: Only a member of this blog may post a comment.

Site Meter